EIVA A/S

To use this site, please enable javascript

Upcoming NaviSuite training courses

Upcoming NaviSuite training courses

Software training courses

Teaching you the ropes through virtual training, classroom courses and blended learning

EIVA offers a variety of software training courses designed to enhance maritime professionals' understanding of NaviSuite, as well as improve their competences with the various tools and features of the range of NaviSuite products.

Software courses are delivered by expert instructors and are run according to a fixed schedule/calendar (detailed below), with training courses being conducted on a virtual platform, as well as at various locations around the world, including EIVA headquarters in Denmark.

Alongside fixed training courses, we also offer the opportunity to arrange customised training courses tailored to your business needs. These courses can be run both virtually and with an instructor physically at hand, depending on your requirements and the given possibilities. It is thus possible to build a course entirely around your requirements, allowing for selection of specific course contents, duration, time and location.

Any other requirements you have, we will be more than happy to hear about and work towards accommodating. If you are interested in this option, please get in touch.

  • NaviSuite navigation and acquisition
  • NaviSuite navigation and acquisition

Virtual training courses 

EIVA's virtual training courses are based on a mixture of eLearning and virtual training via Microsoft Teams. The most basic parts of the training curriculum are covered by modules on the eLearning site, while the virtual classroom part goes more into depth in relation to details of advanced subjects, hands-on training and offers a direct and individual dialogue with the instructor.

You already have products in your My EIVA basket

This product cannot be added to your basket as you already have products in your My EIVA basket.

Seats available
600.00excl VAT
Get in touch

Venue & Language

The course will be held virtually, via Microsoft Teams and will be conducted in English

Duration and timing

The duration of the course is four days with training of the group taking place from 09.00 - 14.00 GMT+1 (CET timezone) and the instructor being available for individual assistance and guidance in solving the excercices that are given from 14:30 - 16:30 GMT+1

The instructor will invite the participants to a half-hour pre-training meeting prior to the start of the course to ensure that all participants are aligned on the process, have met the eLearning requirements and have the software correctly installed and activated

Entry requirement

Attendance at the NaviSuite learning training courses presupposes that participants have passed the required EIVA eLearning modules (with a score of 80% in the quizzes) prior to the start of the course. We recommend that the remaining modules are passed either before or after the course 

EIVA eLearning modules to be passed (score of 80%) prior to attending the training course are underlined in the list below 

  • EIVA Geodesy
    • Geodesy
  • NaviPac 4
    • NaviPac 4.0 Configuration
    • NaviPac 4.1 Helmsman’s Display
    • NaviPac 4.2 Helmsman’s Display Runlines and Waypoint
    • NaviPac 4.2 Helmsman's Display Sonar Data and Remotes
    • NaviPac LogData 
    • NaviPac DataMon
  • NaviPac 3 
    • NaviPac 3.1 USBL Calibration
  • NaviScan
    • NaviScan 9.0
  • NaviModel 4
    • NaviModel 4.0 Patch Test

EIVA eLearning

Access to EIVA eLearning for 30 days is incl. in the course fee to allow the participant to prepare for the course and continued access for an additional 12 months can be purchased at the reduced price of €120 if purchase is made before the free EIVA eLearning account expires

Training days

Day 1-2: NaviPac 4/Helmsman
Day 3: NaviScan/Helmsman
Day 4: NaviEdit and NaviModel - patch-test

Learning objectives

The virtual course is structured around a general curriculum to give the training course participants a broad understanding of the EIVA NaviSuite navigation and acquisition software solutions as well as teach them how to perform a patch-test with the use of NaviEdit and NaviModel.  

The training consists of case-based training sessions, in which an instructor will guide the participants through a series of hands-on training scenarios based primarily on the information acquired from the eLearning modules and combined with a short introduction to each main topic by the instructor

During the course, participants are guided through how to: 

  • Install the relevant NaviSuite software packages
  • Configure NaviPac & NaviScan with common instruments, geodesy, objects etc.
  • Run various programs for different tasks (calibration, documentation, QA)
  • Handle redundant information
  • QC and troubleshooting based on raw data inputs and communication between NaviSuite software packages
  • Perform online Kalman filtering
  • Start, configure and use the Helmsman’s Display 4 program in an online environment
  • Display and calculate live data
  • Configure and use DataMon to calculate and output to NaviSuite or 3rd party SW
  • Create survey plans with runlines and waypoints
  • Log survey data for different tasks and in different formats
  • Conduct editing of multibeam data in a NaviEdit/NaviModel environment
  • Use the various DTM tools in NaviModel and Helmsman’s Display
  • Perform multibeam data cleaning in NaviModel
  • Conduct a Patch Test calibration in NaviModel/NaviEdit

Target group

The course is a blended training course, which means that specified EIVA eLearning modules must be passed prior to the start of the course

The course is furthermore aimed at both surveyors who have some experience with offshore survey work but also at people with less experience but preferably with a basic knowledge of hydrographic surveying 

Certificate

An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course

Access to NaviSuite

EIVA NaviSuite can be downloaded from our website for preparation purposes and can partially run in demo/simulation mode. Activation codes for full access and activation of the relevant NaviSuite software is provided for 30 days as part of the course

Technical information

The participant must have a stable internet connection to run Microsoft Teams smoothly

  • Minimum PC specifications:
    • OS Windows PRO Edition 10 or 11
    • 8 GB Ram as a minimum
    • 20 GB disk space
    • Graphics board 1GB Ram 
    • The user must have administrative rights over the PC
       
  • Other requirements:
    • A mouse with scroll function
    • A headset
    • 2 x monitors (one to view the training and one to perform the tasks)
    • Internet connection via LAN is recommended to avoid fluctuations in the connection 
    • A webcam for optimal interaction with the instructor and the other participants
  • Further details about the hardware and software specs can be found here

Securing your seat 

There is room for up to 8 participants at our virtual training courses and your seat is secured once we have received your payment. We only accept orders that are paid by credit card in our webshop

For further information, please do not hesitate to reach out