ScanFish 3D steering ready option

Supplier:: EIVA
Product no :: SF.3D.SRO

With this option, a standard ScanFish unit will be fitted with a controller equipped with hardware and connectors required for the 3D side panels and thus the 3D steering option. This provides the possibility of upgrading to the 3D steering option at a later point on site, ie without shipping the ScanFish to EIVA headquarters.

Please note: This price includes the controller, which comes with 5 serial payload ports instead of the 6 serial payload ports offered with a standard controller, and does not include the 3D side panels.

3D steering of EIVA ScanFish ROTVs
Increase subsea survey efficiency with horizontal steering.
Learn more
3D steering of EIVA ScanFish ROTVs
Making a wide ROTV reach even wider
The EIVA ScanFish remotely operated towed vehicle (ROTV) models can follow the seabed, keep a fixed depth, or undulate up and down through the water. With just a simple addition, though, they are able to take even another tack.
EIVA has developed an easy and effective way to modify the existing ScanFish ROTV models with '3D' steering – that is, the ability to not only swim up and down, but sideways as well during subsea survey operations.
Increase subsea survey efficiency with horizontal steering
The optional 3D upgrade to the ScanFish ROTV allows the operator to control not just the vertical but also the horizontal movement of any ScanFish ROTV through the water, with a fast steering response and a wide range of lateral movement of +/- 25 metres.
The improvement to ScanFish manoeuvrability brings numerous performance advantages. It is especially useful when operating in conditions where currents may influence ROTV positioning, when long tow cables are used in deep water, or when charting runlines that are not straight, to name but a few scenarios.
It also increases survey efficiency, since overlap of sensor coverage can be reduced and the number of re-surveys required can be minimised. The upgrade is available on all ScanFish models, but is especially relevant to the ScanFish Katria model, in its terrain-following operation mode for wide-sweep UXO surveys.
Moreover, 3D steering can be used with NaviPac Pro – the navigation and positioning product of EIVA NaviSuite – as an optional extra. The software's auto-pilot feature will allow for the ROTV to follow a predefined runline as instructed by the software.

See the ScanFish show off its sideways moves and how easy it is to deploy and recover
Upgrade for current ScanFish ROTVs
Already have a ScanFish ROTV? Then all you need is an upgrade.
Learn more
Already have a ScanFish ROTV? Then all you need is an upgrade
As an upgrade, the 3D steering requires modifications to the ScanFish subsea controller housing (extra ports for the flaps), replacement of side-panels, and a software upgrade of both firmware and the ScanFish III Flight software.
In other words, EIVA outfits the ScanFish model with an extra set of ‘fins’ to give it a greater range of movement, and then teaches it to use its new 3D steering ability.