Choose the bundle variant that matches your vehicle setup and your budget
… ranging from variants dedicated to the essentials of performing inspections – all the way to NaviSuite Mobula Pro + Processing for advanced positioning setups, data fusion and reporting results with comprehensive data deliverables such as 3D models

Improved situational awareness 
… through a highly configurable user interface that is easy to tailor to your needs, bringing all relevant features to your monitor – including simultaneous views of 2D, 3D and 4D model visualisations, as well as real-time quality control tools

Dive once and bring back all you need  
… through data fusion capabilities allowing you to acquire and visualise data from the many supported sensors simultaneously

Bring autonomy onboard your ROV
… through assisted steering modes that make use of the wide range of positioning sensors supported and strong thruster control – these modes include going to a selected waypoint, moving a defined distance and direction, for example when scanning quay walls, orbiting a target, as well as holding a position

Increased precision of data
… through seamless interfacing between hardware and software

Report results easily and clearly
… with comprehensive data deliverables such as fly-by videos, which are integrated with an easy to use observation log tool – additionally, with the + Processing variant, you can generate 3D visualisations which your end-client can work in using the free NaviModel Viewer or the more advanced solution NaviModel Analyser.

Overview at any time  
… by combining all the data collect in one streamlined solution, you can replay your video recordings while showing where your ROV was at the exact time it was recording that video – if you are using the + Processing variant, this position can even be shown on the 3D model generated from your inspection

Automatic data processing (only available in the + Processing variant)
…. by enabling you to set up an automatic workflow in Workflow Manager, letting the software do the hard work even for massive amounts of data – with processing tools such as EIVA’s automatic data cleaning tool EC-3D which you can even run in real time during acquisition, so your 3D model can be automatically cleaned and ready to deliver by the time you’ve retrieved your ROV

Taking your ROV inspections to the next level

NaviSuite Kuda is the optimal solution for efficient ROV operations yielding high-quality data deliverables. This could for example be inspections of offshore wind turbine foundations, harbours and subsea assets, as well as UXO surveys and habitat mapping.

This NaviSuite solution dedicated to ROV inspections draws on the powerful features of the NaviSuite software family. It provides cutting-edge software technology enabling automated operations – all at an affordable price.

Take a test dive – Get a free 30-day trial package 

EIVA offers all new users the opportunity to experience the benefits of NaviSuite Mobula first hand onboard your ROV with a free trial of the NaviSuite Mobula software, no strings attached. Feel free to reach out if you are interested.

Other ROV models can join the NaviSuite family

Note that while NaviSuite Mobula is available as a plug-and-play solution for Blue  Robotics BlueROV2 and VideoRay Defender ROVs, it can be integrated with any ROV – requiring just a little coding by the EIVA crew.

ROV joystick steering

ROVs can be controlled using joystick with NaviSuite Mobula.

Auto-depth and auto-heading

Depth and heading are automatically calculated.

3D seabed terrain 

Seabed terrain can be visualised in a 3D environment.

Multiple Map Views

Multiple Map Views are available.  Each individual Map View window can be configured separately to display only the information required.

Background Maps 

Background Web Map Service (WMS) maps can be displayed.

Import 3D models 

3D models can be imported into NaviModel (drag and drop into the Map View window).

Link 3D models to live objects 

3D models can be linked to any live objects (Vessel, ROV, Scanfish etc).

2D, 3D and side-view displays 

2D, 3D or Side views allows the user to quickly change the view facilitating better data interpretation.

Visibility Slider 

Visibility slider allows users to compare different DTM’s quickly.  This enables comparison over time or between different data processing methods.

Control colours, lights, details 

DTM light and palette settings can be changed at any time.

Profile views 

Create fly-through videos 

Fly-through videos can be created for project or promotional presentations.

Surface positioning and motion (GPS, Gyro, IMU)

Setting up an entire vessel based project in NaviPac is easy performed using intuitive graphical definition tools. The video covers basic project definition, geodetics and vessel navigation setup.

Subsurface positioning (USBL, DVL, INS, Gyro, IMU)

Setting up remote and subsea vehicles is done in a similar manner to the main vessel – easy and intuitive. Adding instruments, positioning sources (transponders, INS, LBL etx) and defining weighting and Kalman filter settings is possible.

FLS - forward looking sonar (wedge and mosaic)

NaviScan supports a series of forward looking sonars such as eg. Tritech, Didson and Norbit. The data will be interfaced and recorded in NaviScan and made available for display in HMD as both stand-alone wedge display and 3D wedge display in the Map views.

MBE multi-beam echo sounder (soundings and DTM)

Multi-beam echo sounder, laser and sidescan will be interfaced and recorded in NaviScan. Display and quality control is easily done in HMD by using raw point clouds, terrain models or data profiles. Using multiple windows allows for QC by looking at data density, model standard deviation etc. Built in semi-automatic cleaning tool enables instant delivery or preliminary DTM.

Configurable event types, hierarchy, and properties

Client and company specific event collections can be tailored to the activity undertaken.

During EIVA Days Denmark 2018, we presented a major expansion to the functionality of camera based scanning.

Create events

Events can be created quickly and are automatically placed onto a DTM.

Tablet for fast event creation

Using the eventing tablet view allows for quicker event creation. With the eventing tablet, you can quickly add all events, or customise which events to add with just a few steps.

Create freespan and burial events

Pipe and seabed markers are used to create freespan and burial events.

This means that events and seabed markers always tie-in.

Recalculate events

Events can be recalculated at any time.

Export events

User configurable templates can be created to export events in the format required.

Export nearest image and videos

Images and videos can be exported for each event or for selected events.

Create pipetracker gap events

Pipetracker gap events are created from continuous sections of rejected pipetracker data.

You can also automatically identify and generate DTM gap events for quality control.

Drape images on digitised pipe

Video images can be wrapped around an existing pipe or digitised line in the Map View window.

Play and control video

Digital video acquired in external systems can be played and controlled inside NaviModel.

Synchronise video with track

In NaviModel the track contains the date and time and must be synchronised with the video time to enable videos to play.

Normally the video time and track time are recorded in the same time zone. However sometimes this is not the case and we need the option to change the video / track time so that video will play.

Adjust video hue, brightness, contrast and gamma levels

Hue, brightness, contrast and gamma levels can be adjusted to improve badly lit videos.

Display video images (Waterfall)

Video images can be displayed as a vertical waterfall.

EIVA offers a number of services for our NaviSuite software users. These include:

• Access to our self-service licence administration and purchase portal, My EIVA
• eLearning, virtual and classroom training
• Software maintenance and 24/7 support programme (Comes free of charge for subscription licences – Learn about the different licence types and the maintenance and support programme)
• Custom development
• Mobilisation/installation – on-site or remote assistance
• Dongle replacement programme for lost or broken dongles for permanent licences

Also, we have a number of special offers:

• NaviSuite Trade-in offer
• Free NaviSuite Academic Licences
• Free Startup Licences